Most people draw the line between an electrician and a handyman somewhere around outlets and switches. The reality is that a lot of the work that looks like a handyman call turns out to be a wiring job once someone opens the wall. A ceiling fan with no switch leg, a bathroom that needs a GFCI outlet where none exists, recessed lights in a room that was never wired for them: these are electrician calls, not because of the fixture itself but because of what has to happen behind it. If the circuit is not there, the circuit has to be run.
We handle that kind of work throughout Alafaya, along with the calls that are clearly electrical from the start: panels that have run out of capacity, breakers that will not hold, wiring that was installed before current code requirements, and outdoor circuits that have to stand up to the conditions this region puts them through. Whatever the job turns out to be, you get a straight answer about the work before it is scheduled.
Call (689) 946-9829 and we will work out what you are dealing with.
A standby generator is only as useful as the transfer switch that connects it to the panel. Without a properly wired transfer switch, a generator cannot feed the house safely during an outage, and it cannot be isolated from the utility line when crews are working to restore power. We handle the transfer switch installation, the dedicated wiring between the generator and the panel, and the load calculations that confirm the panel can carry what the generator puts out. Hurricane season in this region runs from June through November, and a generator that is not wired correctly before a storm is one that will not help when the power actually drops.
Alafaya's housing stock includes homes built across several decades, and the wiring in older construction reflects the standards of its time. Knob-and-tube wiring was never designed for the loads a modern household puts on it. Aluminum branch-circuit wiring, common in homes built in the 1960s and 1970s, develops oxidation at connections that creates heat over time. A partial rewire addresses specific problem areas without touching the rest of the house. A full rewire is the right call when the existing wiring is too far gone to remediate in sections. We scope which one fits on the call, not after we arrive.
Outdoor receptacles in this part of Florida take real punishment. Heat, humidity, and afternoon thunderstorms throughout the summer mean that a standard indoor outlet mounted in an outdoor location will fail, and when it does it can take the circuit with it. Weatherproof covers and wet-location-rated enclosures are not optional for outdoor wiring here. We install outdoor GFCI outlets, in-use covers, and properly rated enclosures for pool equipment, patio wiring, and exterior lighting circuits. Grounding and bonding are part of every outdoor installation, particularly around water.
An intermittent fault is the hardest kind to pin down. A breaker that trips every few days, a circuit that loses power under load and then comes back on its own, a light that flickers only sometimes: these point to a connection problem, a failing device, or a wiring issue that shows up only when conditions are right. We test the circuit systematically rather than replacing parts until something works. The diagnostic covers the breaker, the wiring, the connections at each device on the circuit, and the load the circuit is actually carrying. We'll trace it, fix it, and test it before we leave.
Panel upgrades and service-entrance work come up often in a city this size, where homes have been renovated, expanded, or had major appliances added without the panel capacity to match. Dedicated appliance circuits for dryers, ranges, EV chargers, and workshop equipment are some of the most common panel-related calls we take. If the panel cannot carry the new circuit without exceeding its rated capacity, the panel gets addressed first. We run load calculations before recommending a panel size so the upgrade is right for what the property actually needs.
Surge protection at the panel level is one of the more practical upgrades for any home in this region. A whole-home surge protector intercepts voltage spikes at the service entrance before they reach the wiring and equipment downstream. Given the lightning frequency across Central Florida, it covers a real and recurring risk.
Not every electrical problem starts inside the house. The utility owns the service entrance up to the meter, and a fault on that side of the line produces symptoms that look exactly like a panel or wiring problem: half the house losing power, lights that dim under load, voltage that reads correctly on one leg and not the other.
When we come out and the diagnostic points toward the utility side, we tell you that directly. We identify where the fault appears to originate, explain what the symptoms suggest, and tell you what to report to the utility so they can dispatch the right crew. If the problem turns out to be on our side of the meter, we continue the diagnostic and scope the repair. Either way, you leave the call knowing what is going on and who handles the next step. We keep you informed from diagnosis to final test.
Scheduling starts on the phone. We ask what you are dealing with, where the problem is showing up, and whether the issue is affecting the whole house or a specific circuit or area. That conversation lets us scope the job accurately before anything is booked, so the visit covers what it needs to cover.
For situations that will not keep, we take short-notice calls when the schedule allows. A sparking outlet, a burning smell near the panel, or a breaker that will not stay reset are not problems to watch overnight.
Call (689) 946-9829 and describe what you are seeing.
We will tell you what is available and get the visit on the calendar as quickly as we can.
For rental properties and businesses that need to stay operational, we work around occupied spaces where the job allows. Multi-unit properties in a city this size often need electrical work done while tenants are home, and we plan the visit with that in mind. The scope and the timing are both confirmed on the call. For the full list, go to our services page.
Most electrical work beyond basic device replacement requires a permit, and that is true across the majority of jurisdictions in Florida. Panel replacements, service upgrades, new circuit runs, and whole-home rewiring are the jobs most likely to need one. The specific requirements depend on the jurisdiction, and rules can differ between a city and the surrounding county, so we confirm what applies at the address before the job is scheduled.
We handle the permit filing. That is part of scoping the job, not an add-on. Permitted work gets inspected, and inspection is what confirms the wiring meets current code. For work that requires a permit, we build the inspection into the timeline so it does not delay the project. Let us handle the panel and the permits.
The price for an electrical job depends on what the job actually involves, and that is not always clear until we have talked through the situation. What the fault turns out to be, what has to be opened up to reach it, and whether the existing panel can carry a new circuit without an upgrade are the things that move a quote. A ceiling fan swap in a room with an existing switch leg is a different job from the same fan in a room with no overhead wiring at all.
When you call, we ask the right questions to arrive at a price that reflects the real job. The rate is confirmed before anything is scheduled. If something changes on site, we confirm the updated scope before proceeding. You are not presented with a different number after the work is done.
Local coverage. Safe wiring. Costs explained before we start.
We serve Alafaya and the communities around it throughout Orange County. Nearby areas we cover include Union Park, University, Rio Pinar, Azalea Park, and Bithlo. If you are in the area and want to confirm coverage at your address, call and we will work it out before anything is scheduled.
For rental properties, property managers, and businesses with multiple locations across the east Orange County area, we handle the full range of electrical work across those sites. One call covers the scope, the price, and the schedule.
A pre-sale or pre-purchase inspection is the most common request around a property transaction. Buyers want to know what they are taking on, and sellers benefit from knowing what a buyer's inspector is likely to flag. We can also bring specific items up to current code before closing if the inspection identifies work that needs to be done as a condition of the sale.
Yes. If you manage or own multiple properties and need work done across several of them, we can discuss the scope on a single call and coordinate the scheduling.
Call (689) 946-9829 and let us know how many locations are involved and what each one needs.
We document where the work stopped, what is live and what is not, and what needs to happen at the next visit before the job is complete. If any circuits are de-energized or temporarily capped, we communicate that clearly to whoever is responsible for the property. We schedule the follow-up as soon as the calendar allows and pick up from where we left off.
Yes. The National Electrical Code requires clear working space in front of a panel, and we need that space to work safely. If the panel is blocked by storage, furniture, or appliances, clearing it before we arrive saves time and avoids delays on the day of the appointment.
Call (689) 946-9829 and reference the original job.
We keep a record of what was done and what was found, so the follow-up visit can be focused on what remains rather than starting the diagnostic over. We schedule follow-ups the same way as any other appointment, based on what the calendar allows.
Additions and renovations frequently leave the panel in a situation it was not sized for, with circuits added over time until the breakers are doubled up or the bus is full. Wiring from different eras sometimes gets spliced together without the right connectors or junction boxes, and grounding is often inconsistent between the original construction and the newer work. When something stops working in a home that has been modified, the diagnostic has to account for what was there originally and what was added later. We trace the circuit back to its source rather than assuming the problem is at the device.
Yes. Multi-unit properties, apartment buildings, and rental homes throughout Alafaya and the surrounding Orange County communities are in our scope. We handle panel work, circuit repairs, outlet and fixture installation, and safety inspections across multi-unit residential properties. For property managers with multiple sites, the job is scoped on the call so you know what each location needs before we schedule anything.
We can discuss invoicing arrangements when you call to book. For property managers or landlords handling several addresses, we can structure the billing conversation around the scope of each property so the paperwork is clear.
Call (689) 946-9829 and let us know what you need.
When you call (689) 946-9829, we ask about the symptom, the circuit or area affected, and the age and type of wiring if you know it.
By the end of the call, you know what the job involves, what it will cost, and when we can be there. We are available seven days a week from 7:30 AM to 9:00 PM.
Call (689) 946-9829 and get the answers before anything is scheduled.
We also take electrical work in: Union Park, University, Oviedo, Deltona, Oakland.
Here is a plain-language look at the electrical work we handle in Alafaya and the surrounding area. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job on your list is not here, call and we will tell you whether it falls in our scope.
| Type of Work | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Electrical Safety Inspections |
| Home buyers, landlords, and owners of older properties who want a clear picture of what they have | An inspection covers the panel, the branch circuits, the outlets, and the grounding so you know what is there before committing to repairs or a purchase. |
| Electrical Panel and Service Upgrades |
| Older homes adding EV chargers, major appliances, or additional living space | A load calculation before the upgrade confirms the right panel size for what the home actually needs, not just what fits the budget. |
| Lighting Installation |
| Interior remodels, covered lanais, and outdoor living spaces | Outdoor wiring in Florida's heat and humidity needs materials and terminations rated for the conditions. We specify the right components for wet and damp locations. |
Call (689) 946-9829 to talk through the job, get a price, and get on the schedule. We are available seven days a week from 7:30 AM to 9:00 PM.
(689) 946-9829