Most homeowners can't tell a minor wiring issue from a serious one, and that uncertainty is exactly where a clear, direct conversation with someone who knows the work makes the difference. Winter Garden Electrical Company handles electrical repairs, panel upgrades, wiring, lighting, EV charger circuits, and backup generator hookups for homes and commercial properties across Winter Garden and Orange County. Whether you have a dead outlet that needs tracing or a panel that needs a full upgrade before you add a new circuit, the process starts the same way: a call, a scope, and a price before anything is scheduled.
Available every day from 7:30 AM to 9:00 PM, we take both planned jobs and last-minute calls. Simple scheduling. Pricing agreed up front. Power back fast.
Good electrical work isn't complicated, it's just done right, and that starts with finding the actual cause rather than swapping parts until something changes. Tripping breakers, dead outlets, flickering lights, a burning smell near a receptacle, or a sparking outlet are all symptoms that point somewhere specific when you know what to test. We trace the fault to its source, whether that's a loose connection, an overloaded circuit, a failing breaker, or something deeper in the wiring.
Part of that diagnostic work involves checking GFCI and AFCI protection. GFCI outlets and breakers guard against shock in wet areas like kitchens, bathrooms, and garages. AFCI protection addresses arc faults, the kind of wiring fault that can cause a fire without ever tripping a standard breaker. Both are part of a thorough troubleshooting visit, not an add-on.
We keep you informed from diagnosis to final test, so you know what was found, what was done, and what the circuit looks like before we leave. We'll trace it, fix it, and test it before we leave.
Here's what most people get wrong about their wiring: a panel that hasn't caused a problem yet isn't necessarily a panel that can handle what's coming. Older homes in the Winter Garden area often carry 100-amp service, which was adequate for the load those houses were built to carry. Add a second refrigerator, a large air handler circuit, an EV charger, or a standby generator, and the math changes.
A panel upgrade involves more than swapping the box. We calculate the load the home or building actually draws, confirm the service-entrance wiring can carry the new capacity, and install to the current code. A 200-amp upgrade is the most common path, but the right answer depends on what the property needs, and that gets confirmed before any work is scheduled.
Subpanel work follows the same logic. A detached garage, a workshop, or a large addition often needs its own subpanel fed from the main, and we handle that wiring from the main panel out. The cost is confirmed before work is scheduled, so there's nothing to work out after the fact. Let us handle the panel and the permits.
The homes and wiring in this area have their own quirks, and older wiring is one of the most common. Knob-and-tube wiring, found in homes built before the mid-twentieth century, lacks a ground conductor and was not designed for modern electrical loads. Aluminum branch-circuit wiring, installed widely in the 1960s and 1970s, requires specific connectors and devices to reduce the risk of overheating at connection points. Both are still present in older Orange County homes, and both can be remediated, either partially where a circuit is being extended or replaced, or as a whole-home rewiring project.
Outlet and switch work covers the everyday and the specific. Standard replacement, GFCI outlets for wet areas, AFCI outlets where the panel doesn't already provide arc-fault protection, USB combination outlets, dimmers, three-way switches, and smart switch wiring all fall within the same visit scope. Remodel and addition work adds the planning layer: new circuits routed from the panel, rough-in wiring ahead of drywall, and final trim-out once the space is ready.
Electrical work done to the code inspectors here enforce means the permit record is clean and the wiring is done the way it needs to be, not the way that's fastest. One call and we are on it.
Getting your power back is easier than you think, and the same applies to a lighting upgrade that's been on the list for months. Recessed LED lighting, under-cabinet strips, pendant fixtures, ceiling-mounted lights, and track lighting all involve circuit work, not just fixture swaps. We run the wiring, install the fixtures, and test the circuits before we leave.
Outdoor lighting covers a wider range. Landscape lighting along a path or driveway, security lighting at entry points, motion-sensor lights above a garage or side door, and soffit or fascia-mounted exterior fixtures all require weatherproof wiring and the right fixture rating for Florida's humidity and heat. We handle the circuit from the panel out, not just the fixture at the end of it.
Ceiling fan installation includes both replacement of an existing fan and new installs where only a light fixture or a blank ceiling box was there before. A fan that needs a new circuit or a switch leg run from the panel is a wiring job first. We handle that part before the fan goes up. We keep your home powered and safe.
Florida's climate shapes what electrical work a home actually needs. The heat load is real, storm season runs hard, and lightning frequency here is among the highest in the country. The services below are the ones that come up most often for Winter Garden properties, and each one starts the same way: a call, a scope, and a price before anything is booked.
A Level 2 home charging circuit is the practical upgrade for any EV owner who wants a full charge overnight rather than a trickle from a standard outlet. The job involves a dedicated 240-volt circuit run from the panel, a panel capacity check to confirm the service can carry the added load, and the charger mount and wiring at the garage or carport. Florida's EV adoption has moved quickly, and the panel work that supports a charger also positions the home for whatever comes next. The cost is confirmed before scheduling.
A standby generator is only as useful as the transfer switch that connects it to the home. We handle the transfer switch installation, the panel hookup, and the wiring between the generator and the electrical system. The transfer switch is what prevents backfeed onto the utility line during an outage, and it's what makes a generator safe to run while the power is out. With Florida's storm season and the outages that follow, this is work that gets scheduled before the next hurricane watch, not during it.
Florida leads the country in lightning strikes, and a direct or nearby strike sends a voltage spike through every circuit in the home. A whole-home surge protector installs at the main panel and clamps that spike before it reaches appliances, electronics, and wiring. It works alongside the point-of-use surge strips most people already have, not instead of them. The combination covers both the large transient events and the smaller daily spikes from motors cycling on and off.
Local coverage. Safe wiring. Costs explained before we start. You get a straight answer about the work before it is scheduled.
An electrical inspection covers the parts of a home's wiring that don't announce a problem until one develops. Panel condition, breaker function, grounding and bonding, outlet testing, GFCI and AFCI coverage, and visible wiring in the attic, crawlspace, or basement all get checked. The result is a clear picture of what's current, what's marginal, and what needs attention.
Inspections make the most sense at a few specific moments: before buying or selling a home, after storm damage that may have affected wiring or the service entrance, or in an older home where the wiring has never been looked at since it was installed. We walk through what was found and what it means before anything is recommended.
Permit work is part of most panel, wiring, and service upgrades. We handle the permit process as part of the job, so the inspection record reflects the work correctly. Pool and dock electrical work, including outdoor circuits and corrosion-resistant fixtures, also falls within the permit scope for most Orange County properties. The process is the same: scope it on the call, confirm the price, schedule the work.
The question most callers have isn't just what something costs. It's what they're agreeing to before anyone shows up. When you call, the job gets scoped on the phone. What the work involves, what it covers, and what it costs are all settled before anything is scheduled. There's no separate conversation to have once the work is done.
Common questions about panel upgrades, rewiring costs, EV charger circuits, and generator hookups all get answered the same way: on the call, based on what the job actually involves at your property. We don't give ranges that shift once someone is on site. What the job covers and what it costs are both confirmed before anything is scheduled.
We're available every day from 7:30 AM to 9:00 PM. If you have an urgent electrical fault, call during those hours and we'll work out what the schedule allows.
Winter Garden is the base of our coverage, and we work throughout western Orange County and the communities around it. That includes Windermere, Ocoee, Gotha, Oakland, and Horizon West, along with Apopka to the north and Clermont just across the county line to the west. Whether the property is in a newer Horizon West subdivision or an older neighborhood closer to downtown Winter Garden, the scope of work and the process are the same.
For commercial and multi-unit properties across Orange County, we handle the same range of electrical work: panel capacity, dedicated circuits, lighting, wiring for build-outs, and safety inspections. If the property is nearby and you're not sure whether we cover it, the call will tell you.
The visit starts with a look at what you described on the call. We test the circuit or equipment involved, trace any fault to its source, and explain what the repair or installation requires before any work begins. We keep you informed from diagnosis to final test so you know what was found and what was done.
Yes. Older construction in and around Winter Garden includes homes with knob-and-tube wiring, aluminum branch-circuit wiring from the 1960s and 1970s, and undersized panels that have not been upgraded since the home was built. These are common calls here, and each one has a specific remediation path that we scope on the call before recommending any work.
We work throughout Winter Garden and the surrounding communities, including Windermere, Ocoee, Gotha, Oakland, Horizon West, Apopka, and Clermont. Whether the property is in a newer Horizon West subdivision or an older neighborhood closer to downtown Winter Garden, we are familiar with the area and what the electrical work there typically involves.
Electrical faults often share symptoms. A flickering light can come from a loose connection at the fixture, a failing breaker, or a problem at the panel. The only way to know which one it is involves testing the circuit at each point in the path. That is why the diagnostic step comes before any repair recommendation, and why the scope is confirmed before any work is priced.
Call (689) 946-9829 and describe what you are seeing.
We will work out whether the original fault was not fully resolved, whether a separate issue has developed, or whether something else on the circuit is causing the symptom. A callback gets treated as a job to be scoped and diagnosed properly, not dismissed.
We confirm on the call whether the job is likely to require a specific part that may not be available immediately. If a part needs to be sourced, we let you know before the visit so the schedule reflects the actual timeline. We do not begin work and then leave a job open-ended without telling you what comes next.
Winter Garden Electrical Company is available every day from 7:30 AM to 9:00 PM for repairs, panel work, wiring, lighting, EV charger circuits, generator hookups, and electrical inspections across Winter Garden and Orange County. The price is confirmed before anything is scheduled, and the call is where the job starts.
Local coverage. Safe wiring. Costs explained before we start.
Call (689) 946-9829 to get a quote or schedule a visit.
(689) 946-9829